All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
KSO220
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO220
KSO300
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO300
KSO260
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO260
KSO280
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO280
KSO380
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO380
KSO340
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO340
KSO160
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO160
KSO180
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO180
KSO200
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO200
KSO240
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO240
KSO320
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO320
KSO360
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO360
KSO400
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO400
KSO420
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO420
KSO440
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO440
KSO460
46mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO460
KSO480
48mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO480
KSO500
50mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO500
KSO520
52mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO520
KSO540
54mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO540
KSO560
56mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO560
KSO580
58mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO580
KSO600
60mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO600
KSO140
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO140
KSO620
62mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO620
KSO640
64mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO640
KSO660
66mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO660
KSO680
68mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO680
KSO700
70mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 4.5mmThread Pitch: 1.75mmDiameter of Core: 3.0mmDiameter of Head: 8.0mmHex Recess Width: 3.5mmThreaded Hole: 3.2mmGliding Hole: 4.5mm
Product #: KSO700