All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping. Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
KOE240
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE240
KOE220
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE220
KOE260
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE260
KOE280
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE280
KOE300
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE300
KOE200
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE200
KOE120
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE120
KOE140
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE140
KOE180
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE180
KOE320
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.
Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.
Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE320