All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping. Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
KOB120S
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB120S
KOB140S
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB140S
KOB180S
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB180S
KOB240S
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB240S
KOB220S
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB220S
KOB160S
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB160S
KOB260S
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB260S
KOB280S
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB280S
KOB200S
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB200S
KOB080S
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB080S
KOB100S
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB100S
KOB300S
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB300S
KOB060S
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge. Screws with a star drive recess are very resistant to stripping.
Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB060S