IMEX CrossCut Wedge Osteotomy Guide
36-09EX
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
36-09
9 degrees
IMEX CrossCut Wedge Osteotomy Guide - 9 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-09
36-12
12 degrees
IMEX CrossCut Wedge Osteotomy Guide - 12 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-12
36-15
15 degrees
IMEX CrossCut Wedge Osteotomy Guide - 15 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-15
36-18
18 degrees
IMEX CrossCut Wedge Osteotomy Guide - 18 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-18
36-21
21 degrees
IMEX CrossCut Wedge Osteotomy Guide - 21 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-21
36-24
24 degrees
IMEX CrossCut Wedge Osteotomy Guide - 24 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-24
36-27
27 degrees
IMEX CrossCut Wedge Osteotomy Guide - 27 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-27
36-30
30 degrees
IMEX CrossCut Wedge Osteotomy Guide - 30 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-30
36-33
33 degrees
IMEX CrossCut Wedge Osteotomy Guide - 33 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-33
36-36
36 degrees
IMEX CrossCut Wedge Osteotomy Guide - 36 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-36
36-39
39 degrees
IMEX CrossCut Wedge Osteotomy Guide - 39 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-39
36-42
42 degrees
IMEX CrossCut Wedge Osteotomy Guide - 42 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-42
36-45
45 degrees
IMEX CrossCut Wedge Osteotomy Guide - 45 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-45
36-50
50 degrees
IMEX CrossCut Wedge Osteotomy Guide - 50 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-50
36-55
55 degrees
IMEX CrossCut Wedge Osteotomy Guide - 55 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-55
36-60
60 degrees
IMEX CrossCut Wedge Osteotomy Guide - 60 degrees
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-60
36-SKT
Complete Set
IMEX CrossCut Wedge Osteotomy Guide - Complete Set
These wedge osteotomy guides are designed to provide increased accuracy while simplifying the corrective osteotomy procedure. Guides include a hole for organization onto a small plate clip or wire loop. Temporary k-wires are supported through a separate 0.9 mm (0.035") hole.
The small guide tab is placed into the initial (partial) osteotomy while the larger tab is used for matching the saw blade orientation to the selected angle.
Each angle includes a mirrored positive and negative fixed-angle pair with size options of 9 degrees to 45 degrees (3-degree increments) and 50 degrees to 60 degrees (5-degree increments). Each guide is 0.5 mm thick and manufactured from stainless steel.
Starter Kit: 32 wedges (16 positive and negative pairs)
Concept and design: Alan Cross, DVM, DACVS ??? BluePearl GeorgiaProduct refinement: Derek Fox, DVM, DACVS ??? University of Missouri
Product #:
36-SKT